photo ic photo ic for optical link photo ic for 50 mbps optical link S7141-10 features l dc to 50 mbps data transmission l miniature size due to monolithic ic structure l inversion logic l digital output l designed to be used with l8045 applications l data transmission in fa or oa applications subject to large amounts of electro magnetic noise l high-speed, short distance data transmission l burst data transmission 1 1.8 v 1.5 v 1.2 v tr tf pw ? t = pw1 - pw input optical waveform definition pw1 tr=2 ns tf=5 ns 80 % 50 % 20 % output optical waveform definition 5 ns/div. kpicc0023eb kpicc0022ea S7141-10 output waveform example (input light is referenced by drive circuit on front page) (ta=25 c, pi= -16 dbm, vcc=5.0 v) kpicc0068ea electrical and optical characteristics (ta=25 c) parameter symbol condition min. typ. max. unit data rate f d dc 50 mbps supply voltage vcc 4.75 - 5.25 v current consumption icc without light input - - 32 ma pulse width distortion ? t -6 - +6 ns minimum overload pimax * 2, * 3 -5 - - dbm minimum receiver input power pimin * 2, * 3 - - -17.5 dbm rise time tr * 3 --7ns fall time tf * 3 - - 7 ns voh ioh=20 a 2 - - v output voltage vol iol= -0.6 ma * 4 --1v *2: output from a 1 meter long plastic fiber (gh4001 made by mitsubishi rayon) set close to the molded lens. *3: evaluated based on the input/output waveforms shown below. measured with a low-capacitance fet probe (3 pf or less). *4: output is the ? l ? level (inversion logic) when light is input. absolute maximum ratings (ta=25 c) parameter symbol value unit power supply vcc -0.5 to +7 v output current ioh 10 ma power dissipation * 1 p 250 mw operating temperature topr -10 to +70 c storage temperature tstg -40 to +85 c soldering - 230 c, 5 s, at least 1.5 mm away from package surface - *1: derate power dissipation at a rate of 1.75 mw/ c above ta=25 c
hamamatsu photonics k.k., solid state division 1126-1 ichino-cho, higashi-ku, hamamatsu city, 435-8558 japan, telephone: (81) 53-434-3311, fax: (81) 53-434-5184, www.hamamatsu.com u.s.a.: hamamatsu corporation: 360 foothill road, p.o.box 6910, bridgewater, n.j. 08807-0910, u.s.a., telephone: (1) 908-231-0 960, fax: (1) 908-231-1218 germany: hamamatsu photonics deutschland gmbh: arzbergerstr. 10, d-82211 herrsching am ammersee, germany, telephone: (49) 08152 -3750, fax: (49) 08152-2658 france: hamamatsu photonics france s.a.r.l.: 19, rue du saule trapu, parc du moulin de massy, 91882 massy cedex, france, teleph one: 33-(1) 69 53 71 00, fax: 33-(1) 69 53 71 10 united kingdom: hamamatsu photonics uk limited: 2 howard court, 10 tewin road, welwyn garden city, hertfordshire al7 1bw, unit ed kingdom, telephone: (44) 1707-294888, fax: (44) 1707-325777 north europe: hamamatsu photonics norden ab: smidesv?gen 12, se-171 41 solna, sweden, telephone: (46) 8-509-031-00, fax: (46) 8 -509-031-01 italy: hamamatsu photonics italia s.r.l.: strada della moia, 1/e, 20020 arese, (milano), italy, telephone: (39) 02-935-81-733, fax: (39) 02-935-81-741 information furnished by hamamatsu is believed to be reliable. however, no responsibility is assumed for possible inaccuracies or omissions. specifications are subject to change without notice. no patent rights are granted to any of the circuits described herein. ?200 6 hamamatsu photonics k.k. cat. no. kpic1039e06 jun. 2006 dn photo ic for optical link S7141-10 dimensional outline (unit: mm) 2 5.0 4.5 ?0.3 (including burr) 5.2 ?0.3 (including burr) 0.5 1.27 (specified at the lead root) 1.27 1.27 0.4 1.4 (2.15) (1.5) 6.6 ?0.4 4.3 (0.9) 10? 10? 5.0 lens tip does not project over surface b. tolerance unless otherwise noted: ?.1, ?? shaded area indicates burr. values in parentheses indicate reference value. (0.9) gnd out gnd vcc 1.77 0.97 0.69 10? (0.9) 4.3 0.25 10? detail of part a 1.8 a surface b 0.25 1.24 1.8 0.66 0.2 kpica0043ee
|
